Large Genuine Vox Logo, Gold Plated Plastic
As used on the AC-30 combo amplifier and other twins, and on many Vox speaker cabinets. This was also used on AC50 heads built at the Arbiter factory in c. 1974/5, but not on the earlier (JMI era) AC50s.
Approximately 4.25" x ~1.25" (10.8cm x 3.2cm).
Three mounting pins located about 1.375" (3.5cm) apart.
This is a genuine Vox injection-moulded part, as previously sold by North Coast Music, not a 3D printed reproduction.
Please ensure that you need this larger logo for your amplifier or cabinet - we also sell the smaller 3” wide logos used for e.g. AC30 and AC50 heads in both gold and chrome/silver. See separate listings.
Large Genuine Vox Logo, Gold Plated Plastic
As used on the AC-30 combo amplifier and other twins, and on many Vox speaker cabinets. This was also used on AC50 heads built at the Arbiter factory in c. 1974/5, but not on the earlier (JMI era) AC50s.
Approximately 4.25" x ~1.25" (10.8cm x 3.2cm).
Three mounting pins located about 1.375" (3.5cm) apart.
This is a genuine Vox injection-moulded part, as previously sold by North Coast Music, not a 3D printed reproduction.
Please ensure that you need this larger logo for your amplifier or cabinet - we also sell the smaller 3” wide logos used for e.g. AC30 and AC50 heads in both gold and chrome/silver. See separate listings.
