Skip to Content
The Vintage Amporium
Home
About The Vintage Amporium
Contact
Shop
0
0
The Vintage Amporium
Home
About The Vintage Amporium
Contact
Shop
0
0
Home
About The Vintage Amporium
Contact
Shop
Shop › Horizontal Rectangular Vox logo (late 60s 70s)
Image 1 of 1

Horizontal Rectangular Vox logo (late 60s 70s)

£30.00

Horizontal Thomas/Vox Logo.

Used by bot US and UK Vox equipment in the post JMI era and also on some solid state JMI and VSL/VSEL Vox amps in the later 60s and into the 70s.

Gold plated letters on a black plastic background, includes mounting pins.

4.75" wide by about 1 1/8" tall (121mm x 28mm).

This was manufactured by North Coast Music as an exclusive reproduction part, licensed by Vox UK. The Vintage Amporium purchased the remaining stock from North Coast following its closure in 2024 and is pleased to make this available again for the restoration of vintage Vox equipment.

Horizontal Thomas/Vox Logo.

Used by bot US and UK Vox equipment in the post JMI era and also on some solid state JMI and VSL/VSEL Vox amps in the later 60s and into the 70s.

Gold plated letters on a black plastic background, includes mounting pins.

4.75" wide by about 1 1/8" tall (121mm x 28mm).

This was manufactured by North Coast Music as an exclusive reproduction part, licensed by Vox UK. The Vintage Amporium purchased the remaining stock from North Coast following its closure in 2024 and is pleased to make this available again for the restoration of vintage Vox equipment.

You Might Also Like

Small Horizontal Vox logo (T60, Continental organ and others)
Small Horizontal Vox logo (T60, Continental organ and others)
£20.00
Set of six panel screws and cup washers for vintage Vox amplifiers (steel or brass)
Set of six panel screws and cup washers for vintage Vox amplifiers (steel or brass)
from £10.00
Vox plastic vents with or without logo
Vox plastic vents with or without logo
from £15.00
Vox AC30 Replacement Jack Assembly
from £45.00
Dummy Vox Voltage Selector Knob (non-functional, cap only)
Dummy Vox Voltage Selector Knob (non-functional, cap only)
£15.00