Small Horizontal Vox logo (T60, Continental organ and others)
Small Horizontal Vox Logo - as used on the T.60 head and Continental organ lids.
1.75" wide, .625" tall. Gold plated, with two mounting pins.
Note that Vox produced this logo in the 1960xs with two different pin spacings. Our logo uses the JMI pin spacing which is slightly different than the pin spacing used by EME on Italian made Vox organs and some Vox products produced by Thomas Organ in America. When installing our reissue logo on an Italian made Vox organ you may need to elongate the mounting holes in your organ to prevent pin breakage. Alternatively, remove the pins and attach with double-sided tape or similar.
This was manufactured by North Coast Music as an exclusive reproduction part, licensed by Vox UK. The Vintage Amporium has bought the remaining inventory from North Coast following its closure in 2024 and is pleased to make this part available again for restoration of vintage Vox equipment.
Small Horizontal Vox Logo - as used on the T.60 head and Continental organ lids.
1.75" wide, .625" tall. Gold plated, with two mounting pins.
Note that Vox produced this logo in the 1960xs with two different pin spacings. Our logo uses the JMI pin spacing which is slightly different than the pin spacing used by EME on Italian made Vox organs and some Vox products produced by Thomas Organ in America. When installing our reissue logo on an Italian made Vox organ you may need to elongate the mounting holes in your organ to prevent pin breakage. Alternatively, remove the pins and attach with double-sided tape or similar.
This was manufactured by North Coast Music as an exclusive reproduction part, licensed by Vox UK. The Vintage Amporium has bought the remaining inventory from North Coast following its closure in 2024 and is pleased to make this part available again for restoration of vintage Vox equipment.
Small Horizontal Vox Logo - as used on the T.60 head and Continental organ lids.
1.75" wide, .625" tall. Gold plated, with two mounting pins.
Note that Vox produced this logo in the 1960xs with two different pin spacings. Our logo uses the JMI pin spacing which is slightly different than the pin spacing used by EME on Italian made Vox organs and some Vox products produced by Thomas Organ in America. When installing our reissue logo on an Italian made Vox organ you may need to elongate the mounting holes in your organ to prevent pin breakage. Alternatively, remove the pins and attach with double-sided tape or similar.
This was manufactured by North Coast Music as an exclusive reproduction part, licensed by Vox UK. The Vintage Amporium has bought the remaining inventory from North Coast following its closure in 2024 and is pleased to make this part available again for restoration of vintage Vox equipment.