Skip to Content
The Vintage Amporium
Home
About The Vintage Amporium
Contact
Shop
0
0
The Vintage Amporium
Home
About The Vintage Amporium
Contact
Shop
0
0
Home
About The Vintage Amporium
Contact
Shop
Shop Large Genuine JMI Vox Logo (AC30 twin and others) - gold
Vox JMI Logo large 2.jpg Image 1 of 4
Vox JMI Logo large 2.jpg
Vox logo large.jpeg Image 2 of 4
Vox logo large.jpeg
Vox JMI Logo large 3.jpg Image 3 of 4
Vox JMI Logo large 3.jpg
Vox JMI Logo large 5.jpg Image 4 of 4
Vox JMI Logo large 5.jpg
Vox JMI Logo large 2.jpg
Vox logo large.jpeg
Vox JMI Logo large 3.jpg
Vox JMI Logo large 5.jpg

Large Genuine JMI Vox Logo (AC30 twin and others) - gold

£25.00

Large Genuine Vox Logo, Gold Plated Plastic

As used on the AC-30 combo amplifier and other twins, and on many Vox speaker cabinets. This was also used on AC50 heads built at the Arbiter factory in c. 1974/5, but not on the earlier (JMI era) AC50s.

  • Approximately 4.25" x ~1.25" (10.8cm x 3.2cm).

  • Three mounting pins located about 1.375" (3.5cm) apart.

This is a genuine Vox injection-moulded part, as previously sold by North Coast Music, not a 3D printed reproduction.

Please ensure that you need this larger logo for your amplifier or cabinet - we also sell the smaller 3” wide logos used for e.g. AC30 and AC50 heads in both gold and chrome/silver. See separate listings.

Add To Cart

Large Genuine Vox Logo, Gold Plated Plastic

As used on the AC-30 combo amplifier and other twins, and on many Vox speaker cabinets. This was also used on AC50 heads built at the Arbiter factory in c. 1974/5, but not on the earlier (JMI era) AC50s.

  • Approximately 4.25" x ~1.25" (10.8cm x 3.2cm).

  • Three mounting pins located about 1.375" (3.5cm) apart.

This is a genuine Vox injection-moulded part, as previously sold by North Coast Music, not a 3D printed reproduction.

Please ensure that you need this larger logo for your amplifier or cabinet - we also sell the smaller 3” wide logos used for e.g. AC30 and AC50 heads in both gold and chrome/silver. See separate listings.

Large Genuine Vox Logo, Gold Plated Plastic

As used on the AC-30 combo amplifier and other twins, and on many Vox speaker cabinets. This was also used on AC50 heads built at the Arbiter factory in c. 1974/5, but not on the earlier (JMI era) AC50s.

  • Approximately 4.25" x ~1.25" (10.8cm x 3.2cm).

  • Three mounting pins located about 1.375" (3.5cm) apart.

This is a genuine Vox injection-moulded part, as previously sold by North Coast Music, not a 3D printed reproduction.

Please ensure that you need this larger logo for your amplifier or cabinet - we also sell the smaller 3” wide logos used for e.g. AC30 and AC50 heads in both gold and chrome/silver. See separate listings.