Vox plastic vents with or without logo

from £15.00

Amplifier Vent with or without Vox Logo, black plastic.

Exact fit replacement part for all US/Thomas Vox amps with "thin" Vox logo air vents.

This can also be made to fit JMI UK amplifiers with a little modification of the hole spacing in the amplifier.

  • The two mounting pins on this vent are 1/8" diameter, spaced 5.375" from center to center.

  • Dimensions are ~5.58" long x ~.67" wide x ~.14 thick." (c. 142 x 17 x 3.5mm)

Two versions are available - one with the Vox Logo, one without logo. A set of three (one with, two without) the logo is also offered as the vents were often used in that configuration.

Option:

Amplifier Vent with or without Vox Logo, black plastic.

Exact fit replacement part for all US/Thomas Vox amps with "thin" Vox logo air vents.

This can also be made to fit JMI UK amplifiers with a little modification of the hole spacing in the amplifier.

  • The two mounting pins on this vent are 1/8" diameter, spaced 5.375" from center to center.

  • Dimensions are ~5.58" long x ~.67" wide x ~.14 thick." (c. 142 x 17 x 3.5mm)

Two versions are available - one with the Vox Logo, one without logo. A set of three (one with, two without) the logo is also offered as the vents were often used in that configuration.